GODIAG GT110 VW Audi CAN-Bus UDS 4th Generation IMMO Test Platform

GODIAG GT110 VW Audi CAN-Bus UDS 4th Generation IMMO Test Platform with POGO PIN to Read & Write

Compatible Devices:
The GODIAG GT110 is compatible with a wide range of diagnostic and programming tools, including HEX V2, VAGCOM VCDS 5053, VAS5054A, VAS6154, SUPER VAG K+CAN, Obdstar, Lonsdor, AVDI, ZEDFULL, VVDI2, Key Tool Plus, X300 DP Plus, AUTEL, and others.

GODIAG GT110 VW/Audi CAN-Bus UDS 4th Generation - Key Functions:

1. Read and write dashboard data using POGO PIN technology.

2. Convert the dashboard for standard OBD2 use via offline connection.

3. Perform synchronization tests between key chips and instrument clusters.

4. Equipped with an independent power switch.

5. Simulates ignition switch activation.

6. Displays real-time working voltage.

7. Detects CR2032 remote key battery status.

8. Shows the instrument’s real-time working current.

9. CANH UDS communication status indicator.

10. Key detection adapter with built-in indicator light.

11. Stable and cable-safe POGO PIN connection – avoids damage and ensures reliability.

How to Use the POGO PIN Interface:

1. Connect the power supply (ensure the power switch is OFF).

2. Press the IGN (ignition) button to turn on ignition power.

3. Plug in the instrument connector.

4. Locate the POGO PIN contact point on the specific dashboard and connect using the probe.

5. Turn on the power switch and wait 3–5 seconds. If the ABS light on the dashboard flashes, the device has successfully entered POGO PIN read/write mode.

Intelligent IMMO System – Emergency Start Area Detection

To locate the vehicle's emergency start induction area, press the vehicle’s start button and move the GODIAG device’s key identifier near various spots around the start module. If the key identifier light blinks or stays illuminated, the area detected is the emergency key sensing zone.

In the event of a smart key with a dead battery, simply place it within this sensing area to start the vehicle normally.

IMMO Start Function & Key Chip Detection

Test Result Interpretation:

1. Light flashes briefly and turns off
   → The IMMO chip and key chip are functioning correctly.

2. Light continues to flash
   → The key chip is not correctly matched with the vehicle’s IMMO system. Reprogramming is required.

3. Light does not flash
   → A fault is present in the vehicle’s IMMO system. Please inspect the system for issues.

GODIAG GT110 Package Contents (VW/Audi CAN-Bus UDS 4th Generation)

• 1 x GODIAG GT110
  IMMO System Test Platform Cable
  Compatible with VW, Audi, Skoda, and SEAT (4th Gen CAN-Bus UDS)
  Equipped with POGO PIN interface for dashboard data read/write operations