Xhorse M5 Clamp XCMNM5GL Available for All Xhorse Automatic Key Cutting Machine For Dolphin XP005 / XP005L / Condor XC-Mini Plus / XC-Mini Plus II
Xhorse upgrade M5 collet available for all
Xhorse automatic
key cutting machinesWhat is Clamp M5?
The M5 jaw Clamp is used for single-sided, double-sided, and high-security keys.
M5 is 2 in 1 clamp of M1 and M2 and supports external 2-way, channel track, standard single-sided, external 4-way, internal 4-way, standard double-sided, and dimple key types.
More convenient to directly switch the M1 and M2 clamps, no need to install or disassemble them again and again.
Xhorse M5 Clamp Features:
- No need to calibrate the clamp
- HU162T without auxiliary key blank
- Supports thin/narrow/short keys
- Integrate M1 and M2 clamp functions
This is a new upgraded M5 Clamp, available for all Xhorse automatic key-cutting machines:
Dolphin XP-005LCondor MINI Plus IICondor XC-MINI
Condor XC-MINI Plus
Dolphin XP-005
XCMNM5GL Support:
2 track external
Channel track
Standard single-sided
4 track external
4 track internal
Standard double-sided Dimple
M5 clamp with two sides of A and B. Users can turn the clamping surface to cut according to cutting needs.
It's no need to repeatedly install and uninstall to replace clamps.
Here is the method of using the M5 clamp.
1) Loosen the "key lock knob" counter-clockwise to make the right slider of the clamp the right limit.
2) Turn the movable module clockwise, and turn the clamp from side A to side B.
Tighten the key lock knob" clockwise to lock the clamp.
How to use the M5 clamp:
- Loosen the "Key Lock Knob" counterclockwise to bring the right clamp slider to the right limit.
- Rotate the mobile module clockwise and rotate the clamp from side A to side B. Tighten the "key lock knob" clockwise to lock the clamp.
Pay attention to the position of the clip key, not in the bottom groove.
If the key clip is in the wrong position, you will fail to cut the key (usually you will get error code 2).
