This software offers you 2 options of using:
1 – Use any OBD2 tool, that can extract 7 bytes of component security from the car unit or extract them from the ECU eeprom file.
Run the software, press PROG, and select the car manufacturer.
Enter component security bytes. The module will prepare the dealer key for programming with the diagnostic device and PIN code.
2 – If you have a working key, and you can extract at least 6 bytes of component security from engine ECU, you can search for a 7-th byte using the working key and prepare a new dealer key.
Go to TOOLS and select this option. Enter the car manufacturer and 6 bytes of CS. The software will search for the 7th byte.
When searching is completed, remove the original key, insert the key with blank ID48 or Silca T6 – JMA TP08, press OK and the dealer key will be prepared.
You can select between standard ID48 and TS48 copy transponder.
If you select ID48, you will get the dealer key ready for programming with the diagnostic device and PIN code.
If you select TS48, you will get a full copy of the original key ready to start the car.