The module helps you to copy Philips Crypto 2 (HITAG2, ID46, TP12) keys onto JMA TPX3/4 – Errebi TX4/TX4SA transponders.
For performing the cloning procedure YOU NEED a VEHICLE TO BE WITH YOU, not only a key.
IMPORTANT NOTE: you need a JMA TPH cloner or 46 decoders to work with this software.
TPH cloner needs to be connected to a PC COM port (or thru a USB-COM converter, if your PC doesn`t have a pure COM port) thru a simple convertor cable.
A converter cable is MANDATORY! The cable, that comes with the TMPro box IS NOT for connecting the JMA TPH cloner to the PC.
If the cloner has 2 COM ports, connect the cloner to the PC using the LEFT port of the TPH cloner.
You CAN`T USE the USB port of the cloner to connect it to the PC, the USB port is for software upgrade of the TPH cloner.
Cloner also needs a 12v supply to work, “plus” is in the center of the connector.
If you want to connect in one chain both TPH and TPX cloners, using a convertor cable connect the TPH cloner to the PC and connect the TPX cloner to the right port of the TPH cloner.
The cable between TPH and TPX cloner does not need a converter.