Tmpro 2 Tmpro 2 Software module 108 – Yamaha bikes immobox Moric type
- Serial Number Is Required .
- After receiving the payment notification and Serial Number, we will promptly send you the file or an update notification.
This is a new variant of the Yamaha immobox, where there is no serial eeprom S29190.
In the place, where you must find serial eeprom S29190, you find 16-pin chip TMS3705.
Keys ARE NOT in this chip TMS3705!
The memory device is a MORIC MCU 30 pins SSOP package.
MORIC MCU in this immobox IS NOT POSSIBLE TO READ!
Programming of MORIC MCU is thru TMPro, view connection diagrams and instructions
Use Yamaha key or Texas Crypto – Silca 4D-60 – JMA TP06/TP19 transponder.
The written transponder is ready and programmed to start the bike.
Also, you can set immobox to a virgin state.
IMPORTANT NOTE: You can program ONE MASTER key and ONE SLAVE key. If you want more slave keys, program a slave key and clone it with software 65.
IMPORTANT NOTE: If you want to program the MASTER key, you also MUST RESET engine ECU (set engine ECU to VIRGIN state), because programming of MASTER key will DELETE synchronisation MORIC immobox – engine ECU.
The procedure to reset the Yamaha engine ECU is described HERE
The diagram for Yamaha engine ECU B7M / BBW / BNF / BAP / B3T is HERE.
Vehicles equipped with this unit:
Yamaha: All models after the year 2010, including but not limited to R1, T-MAX, R6, BT1100, FJR, FZR, FZ1, FZ6, FZS, XT, XJR, XTR, XTX, XVX, MT etc…
