Microtronik Autohex II BMW WVCI HW4 Diagnostic Scan Coding Programming Tool Standard PackageUsing this kit you can do the following:
Only with Autohex: Reading ISN in G Series:
MD1 and MG1 (MDG1) ISN read the following DME/DDE (writing is possible for some DMEs):
Only with Autohex: Read and write ISN in MD1 and MG1 F series:
MD1 and MG1 (MDG1) ISN reading of the following DME/DDE:
Read and write each ISN in the F string:
Autohex II reads and writes every ISN for DME/DDE in the F string:
Read and write long ISN in string E:
Autohex II reads all ISNs for DME/DDE in series E:
Read most of the old ISN's in Series E:
The Autohex II ISN for DME/DDE in Series E reads:
Individual programming of any Ecuadorian protocol (DOIP protocol)
Autohex II is the most advanced BMW programming tool
CAS1, CAS2, CAS3, CAS3+, CAS4, CAS4+ ISN
With Autohex II, you can read and write the ISN of all CAS versions in the E and F series.
Read ISN of every Traciore DME/DDE via boot mode
This function is important when DME/DDE does not respond, and ISN needs to be replaced
BMW E Series EGS ISN MATCH CAS
You can reset the EWS security of all BMW E series EGS by OBD
BMW F series EGS EWS Reset for 6HP and 8HP
You can reset EWS in EGS 6HP (on the seat) and 8HP by OBD or on the seat
BMW E series, F series, and G series Auto Coding
Autohex II automatically calculates the required coding data from the vehicle order of the vehicle and then applies this data to the target unit
Manual coding in E series and F series.
You can modify the economic coding to add and remove features in any BMW vehicle control unit
Vehicle Order Management (FA) in BMW vehicles
You can modify the vehicle request to change the configuration.
You can also backup and restore FA from the backup ECU
E and F series key programming.
CAS1, CAS2, CAS3, CAS3+, CAS4, CAS4+, FEM, and BDC are supported by Autohex II, this includes if you lose all keys
Unlock security from CAS4, CAS4+, FEM, and BDC
You can unlock CAS4/4+, BDC, and FEM security to be able to:
- Change CAS, BDC, FEM VIN
- Change CAS, BDC, FEM ISN
- Mileage reset for CAS, BDC, and FEM
- Key making for CAS, BDC, and FEM
Read and write ISN bench for MSX8X
With Autohex II, you can read ISN for MSD80, MSD81, MSD85, MSD85Y, MSD87, and MSV90 in E/F Series on the bench without opening the ECU.
Hextag chip tuning tool included
Hextag is a powerful tool for ECU cloning, chip tuning, reading/writing all CAS versions, and key/EEPROM reset, Hextag:
- Reproduction/tuning for a wide range of brands. This job is free for 30 days
- Read and write CAS 1,2,3,4 and 4+ EEPROM and FLASH 100% securely
- Read and write other modules from BMW, Mercedes, Audi, and other BDM protocol
- Adjust KOMBI (instrument cluster) mileage
- FRM repair for BMW in one click
- Renew all keys for BMW and many other brands
What did you get:
- Autohex II WVCI HW 5 device.
- BMW Standard License.
- BMW Online Programming License.
- BMW key programming license.
- ISN Boot Mode License for BMW.
- BMW ISTA/D dealer driver software.
- 1 year of technical support.
- One-year hardware warranty.
What you missed in this package:
- BMW E Series, F Series, and G Series online Ecu Programming and Manual coding (can be ordered later)
- BMW E and F Key programming (can be ordered later)
- ISN Reading from Tricore Ecus by boot mode. (can be ordered later)
|Attribute name||Attribute value|
|Online Ecu Programming||YES|
|Ecu Advanced Coding||YES|
|Read ISN DME and CAS||YES|
|Write ISN DME and CAS||YES|
|Read ISN From EGS 6HP/8HP||YES|
|Reset EGS EWS 6/8 HP||YES|
|DME ISN By Boot Mode||YES|
|Vehicle Order (FA) Manager||YES|
|Read CAS2,3,4,4+ Flash (BDM)||YES|
|CAS1,2,3,4 Key Programming||YES|
|FEM/BDC Key Programming||YES|
|CAS4/FEM/BDC Mileage Reset||YES|
|Hextag Tool Included||YES|
|Technical Support||1 year (Extendable)|