Audi A6L Q7 Steering Column Module J518 ELV Emulator

J518 ELV Emulator for Audi C6 Audi Q7 Audi A6 Steer Column Module J518 Work with VVDI Prog Dedicated Programming Cable

Notice:
The simulator is burned after the test, preferably on the vehicle.
In the testing of the test platform, it is necessary to pay attention to the 20Pin port wiring check.
Some platform wiring harness production problems will conflict with our burning interface, which may damage the chip.
Wiring error: 10 (red) should recover after 20 (blue).
You only need to write EEprom data, no need to write other data like Flash. etc.
Please only select "j518（2010-）0L01Y" in VVDI Prog, no matter whether your car model is before or after 2010.

The Emulator is without a lock or lock function, if you need the same function as the original J518 emulator module, please buy a J518 repair.
The dedicated VVDI PROG programming cable connector here is only for emulator board programming, not for the original J518 PCB.
If you have a car that needs to repair the J518 module with this emulator, you need to read the data in the MCU by wire soldering or other ways.
Then write data into the emulator MCU via this dedicated cable connector.

How to apply the steering column lock Audi C6 J518 ELV module?

It is applied to fix the 6th Generation AUDI Module Failure Repair Module Emulator A6 Audi Q7 Audi C6 Audi.

1. The universal solution is three kinds of MCUs that can Repair this emulator.
   (Replace MCU mask: 1L59W, 3L40K, OL01Y directly)
2. Stable and durable, with no compromised components such as relays, micro switches, and motors on it.
3. Easy to Audi a6 c6 steering column module repair, write in original module J518 model dump with VVDI PROG directly, no soldering wire needed.

Package Includes:

1pc x AUDI Q7 A6 C6 Steer column module J518 ELV Module Emulator with VVDI Dedicated programming cable