HexProg Chip Tuning Tool And ECU Programming and Cloning Tool
Chip tuning, power control cloning, and other programming tasks require a high-performance tool in both hardware and software.
The Hexprog programming tool is built according to this philosophy, we took care of every little detail when we built the hardware and used our vast experience to make software that is fast, reliable, and easy to use.
A result is a great tool that can serve users to the fullest.
| Attribute name | Attribute value |
|---|
|
| Microprocessor | RISC 32 bits 220MHz |
| External SDRAM | Available |
| Ecu Communications | Factory Mode (On bench), Boot Mode, JTAG, BDM, and OBD |
| Power Supply | 12 to 28V |
| Warranty | 1 year (Extendable) |
| Technical support | 1 year (Extendable) |
| Major Accessories | All Included |
Hexprog Programmer Key Features
- Master copy. Single license for all bench and OBD protocols
- Supports one of the most comprehensive Powers / TCU Control Lists in cars and trucks For ECU cloning and chip tuning, check out the Hexprog Ecu List
- Supports old and newer Ecus/TCUS systems from Bosch, Continental, Delphi, Marelli, Denso, Temic, TRW, and Valeo.
- Reads every BMW Long ISN from BMW DME and DDE including MD1 and MG1 in F/G Series
- Supports reading/writing of P-Flash, D-Flash, External Flash, and external EEPROM, helps automatic checksum for both flash and external flash
- Users can order services like IMMO OFF, DPF OFF, EGR OFF, Addblue...etc online from the Hexprog website
Hexprog Portal
Hexprog users can use this portal to access online services and manage their Hexprog license
We have created a demo account, which you can use to check what real users can see
- Go to the Hexprog portal login page
- Use heexprog.demo@microtronik.com as your username
- Use micro ^ tronik as a password
Please understand that this is a demo account, you can just browse the services!
Hexprog Functions
On Bench Chip Tuning/Ecu Cloning
You can read and write P-Flash, D-Flash, External Flash, and external EEPROM with the option to debug checksum automatically, and you will have two ways in most Ecus:
- Factory Mode: With this option, you don't have to open the ECU control cover.
Just connect some wires to the power and signals and you're ready to go. - Boot Mode: Opening the ECU console to shutdown is mandatory to connect the boot wire on the console.
This method is useful when the ECU console is not responding.
OBD Chip Tuning
Hexprog starts supporting OBD functions in early 2021, and it supports reading/writing the map area (virtual reading is also supported).
It also includes important functions of some ECUS, such as VIN Changing, Coding Backing/Restore, and Reading/Erasing Fault Codes.
Microtronik has extensive experience in all types of vehicle ECUS flashing and coding and we have published this experience in Hexprog to produce one of the safest OBD-driven programming tools available.
BMW ISN reading
We took the most important part of Autohex for ISN management and adopted it at Hexprog.
With Hexprog, you can read the long ISN from any BMW ECU including the latest Bosch MG1/MD1 ECUS from 2005 to the present DME/DDE.
BDM read/write
With Hexprog, you can jailbreak immobilizers such as CAS at BMW, EIZ/EIS at Mercedes Benz, BCM at Volkswagen, Porsche...etc.
Hexprog is the only tool that can read/write CAS4 without removing solder or cutting any part of the board.
The same in most immobilizers.
Built-in Editors
With Hexprog, you can edit various Flash data such as
- Edit CAS3 + VIN, ISN, and keys
- Edit CAS4, CAS4 + VIN, and ISN
- Edit mileage for BMW instrument clusters
Repair BMW FRM
The BMW E series has a serious problem with FEM, the data is easily corrupted.
With Hexprog, you can repair FRM 3 in one click.
Reset mileage in protected EEPROMs such as M35080, M35160, 080D0WQ, and 160D0WQ, the process takes a few seconds
Reset key for many brands like Audi, BMW, MINI, Porsche, Toyota, Fiat, Renault...etc.
Read/Write a wide range of EEPROM SOP8 memory modules.
Works in conjunction with Autohex to make keys.
HexTag And HexProg Programmer Comparison
Hextag and Hexprog both have the same functions.
The difference lies in the hardware structure, which may reflect future added performance and functionality.
The table below shows the main differences.
Feature | Hextag | Hexprog |
Microprocessor Speed | 100 MHz | 220 MHz |
External Memory | Not Available | Available |
USB Speed | Full Speed (12Mbps) | High Speed (480 Mbps) |
Power Protection | Good | Perfect |
Key coil | Internal | External |
Hardware Support For Future functions | Almost will be supported | Sure will be supported |
Hexprog Accessories
Hexprog Power Module And BDMEssential parts, used for Ecu Cloning and BDM functions
Hexprog OBD CableThis cable is used for ECU and TCU Chip tuning in Hexprog
Hexprog MPC ModuleUsed for Ecus have MPC55X and MPC56X Microcontrollers
Hexprog Jtag ModuleUsed in Boot Mode function for a wide range of Ecus/Tcus
Hexprog EEPROM ModuleUsed for EEPROM rest, read and write functions
Hexprog Key Reader ModuleThis module is used for reading the EE contents of keys
